Mineral Wet Stone Effect 5L

NANOQUICK® MINERAL WET

Product description:
Efficient product for impregnation of natural stone surfaces. Gives hydrophobic properties and effect ”wet stone ”. The product NANOQUICK® MINERAL WET effectively protects the material against penetration into the structure of water, dirt and tar substances of various kinds. The impregnation is carried out by spraying. The intensity of dimming depends on the type of impregnated stone. The impregnation is resistant to external factors, including UV radiation. For outdoor use. Capacity: 0,18-0,25 l/m² .
Application:
Before starting work, remember about basic safety and hygiene rules. The product is ready to use, do not dilute or add any other liquids under any circumstances. At the beginning of work, clean the protected material so that the surface is completely clean, use NANOQUICK® MINERAL PLUS for this product and the surface is degreased and dry. The substrate must also be free of structural defects and cavities. Before starting work, protect other non-impregnated materials. The product is applied using the HVLP low pressure method. It is best to use a gun that has a nozzle with a diameter of 1.3 mm to 1.5 mm, you can also apply the product with a brush or a roller. Before the correct protection, test on a small piece of material and check whether the effect achieved is desired. Apply the product evenly on the material, use more product on highly absorbent substrates. Product to be used in the temperature range +2 to + 35 °C. The product is not frost resistant. Remember that the material to be protected until it is dry should not come into contact with water or other liquids (minimum 12 hours).

Protect The Green !
DO YOU WANT MORE INFORMATION ABOUT THE PRODUCT AND ITS USE? PLEASE CONTACT OUR TECHNICAL ADVISOR Support opeNnano Polska