Paving Block Impregnate Super Wet Cube Effect 5L

NANOQUICK® WET CUBE EFFECT

Product description:
Efficient product for impregnating the surface of paving stones giving the effect of "Wet Paving". The product NANOQUICK® WET CUBE EFFECT effectively protects the material against penetration into the protected structure of water, dirt and tarred substances of various kinds. Impregnation is carried out by means of the spray method. The intensity of darkening depends on the type of impregnated paving block. The impregnate is resistant to external factors, including UV radiation. For outdoor use. Capacity: 0.18-0.25 l/m². 

Application:
Before starting work, remember about basic safety and hygiene rules. The product is ready to use, under no circumstances should it be diluted or added to any other liquids. At the beginning of work, clean the protected material so that the surface is completely clean, degreased and dry. For this purpose, use NANOQUICK® PAVING STONE PLUS. The substrate must also be free of structural defects and cavities. Before starting to work, protect other non-impregnated materials. The product is applied using the HVLP low pressure method. Best use a gun that has a nozzle diameter of 1.3 mm to 1.5 mm. You can also apply the product with a brush or roller. Before the correct protection, test on a small piece of material and check whether the effect achieved is desired. Apply the product evenly on the material, use more product on highly absorbent substrates. If the effect is not satisfactory, you can repeat the operation. The product can be used in the temperature range +2 to + 35 °C. The product is not frost resistant due to the water content. Remember that the material to be protected until it dries does not come into contact with water or other liquids (minimum 12 hours). Store the product in a place that is difficult to reach for children.

Protect The Green!
DO YOU WANT MORE INFORMATION ABOUT THE PRODUCT AND ITS USE? PLEASE CONTACT OUR TECHNICAL ADVISOR Support opeNnano Polska .